How To Respond to Water in Light Fixtures

12/22/2021 (Permalink)

How to Handle Water in Lighting Fixtures

Water that drips from the fixtures can be a pretty frightening experience, especially when you realize the extent of damage that water in light fixtures could represent. If you see water in the ceiling fixtures, don't try to release the water. Take the following steps to prevent further damage.

• Shut off the electricity to the home at the breaker box.
  
• Use a non-contact voltage tester to confirm that power is off.
  
• Shut down water to the house at the main shutoff valve.
  
• Contact a Ventnor, NJ, professional.
  
  

Once these steps have been completed, remove any water-logged furnishings to a dry location.

Keep Your Family and Home Safe

It may seem convenient or even funny to poke at the water in light fixtures, but there's more to worry about than ceiling damage. The combination of water and electricity could put everyone in the home at risk of shock or electrician.

Why Not DIY This Damage?

There are several other reasons to step back and let professionals deal with water in the ceiling. For example, identifying the source of the leak is difficult. The water could have covered a lot of distance before pooling in your fixtures. The water may have caused structural damage or mold, and professionals are often better prepared for dealing with those large-scale problems.

Address the Underlying Problem

Once the leak and the ceiling damage have been addressed, you may want to tackle some other home repairs. If the leak originated with your roof, you might need to repair holes in the roof and replace shingles or other roofing. You may need to replace insulation or clean out the gutters running along the roofing. Once again, significant damage in these areas should be tackled by Ventnor, NJ, professionals.

The best way to maintain safety and prevent further damage to your home is to shut off both the water and electricity and then contact a water damage repair professional. These experts will address water in light fixtures, remove the damaged components, repair the leak and the ceiling damage, and install any new fixtures as necessary.